Water detector and cavity detector GeoSeeker Mini

the geoseeker utilizes a geoelectrical measurement procedure based on schlumberger to read the soil resistivity. based on that ground resistance the detector is capable to locate underground water deposits, water-bearing gravel and groundwater level as well as cavities like caves, tunnels, chambers and the like. thus the geophysical detector can be deployed as water finder or cavity detector at the same time. the geoseeker`s hardware components are completely controlled by a modern android tablet pc. all commands and measurement results are transferred wireless via wi-fi. using the pre-installed software application you simply select one of three supported scan modes: active scan (accurate) while using this scan mode the geoseeker utilizes two electrodes to inject electrical power into the underground soil. two additional electrodes are measuring the potential difference (fall of voltage) at specific scan points to calculate the final resistivity value. this mode is used to detect underground water deposits, hidden caves or even impervious layers and barriers within the underground soil. in active scans you will be able to define a specific depth range in that you are going to conduct your measurement. so you will define a starting and ending depth between 5 meters (16 feet) and 250 meters (820 feet). Control unit Dimensions (H x W x D): 410 x 340 x 180 mm Weight: 4.5 kg Input voltage (max.): 11 – 13 V DC / 30 W Display: 3.5” Resistive touch, 480 x 320 Pixel Display CPU: Cortex M3, 32 MHz, 128 KB RAM Data memory: 4 GB Sample rate: 4096 Hz (64-fold oversampling of 512 values) Operating time: approx. 6 – 8 h CPU: 80 MHz Cortex M3 ADC: 16 bit Effective Range: (differential) –1400 to +1400 mV Measurement Period per Scan Point: min. 16 s Output: 320 V / 0.4 A Input Resistance (static): approx. 12 MΩ Power Cable Drums (Ø 290 mm) Dimensions (H x W x D): 360 x 290 x 200 mm Weight: 3.6 kg Cable length: 100 m Markers: 10 Electrodes Dimensions (H x W x D): 270 x 120 x 35 mm Weight: 0.4 kg Voltage Cable Cable length: 10 m Markers: 10 The technical data are average values. Minor deviations are possible during operation.

Control unit with touchscreen Electrode Power Pack with charger and travel adapter Voltage Cable (10 m) Power cable drum (Ø 290 mm) Connecting Cable (2 m)